Description
Timer controlled
Extractor fans with a built-in timer control means that the fan will operate with the bathroom light switch and then overrun for a set amount of time to continue removing moisture from the air. This is great for steamy bathrooms, allowing you to turn the light off but continue with extraction for a short time.
24 ltr/s extraction rate
Building regulations stipulate that extractor fans need to be able to extract at least 15 litres of air per second. It’s needed to ensure a minimal build-up of moisture in the room, reducing mould and grime in damp areas. This fan will extract a crazy 24 litres per second! That’s almost twice what’s recommended!
IP44 Rating
This product has a rating of IPX44, meaning it is protected against solid objects larger than 1mm (wires, nails, screws) and is protected against water splashes from all directions.
Zone 2 Rated
IP rating stands for 'Ingress Protection rating' and this helps us determine what bathroom electricals can go in particular bathroom zones. An IP (Ingress Protection) number or code is used here in the UK to specify the environmental protection of enclosures around electronic equipment. These ratings are determined by specific tests.
These extractor fans can be fitted within Zone 2 as shown below.
Please note: Electrical products installed in these zones must meet the required IP rating. Always consult a qualified electrician to ensure compliance.
Additional information:
- 2 Year Guarantee
- Please note: This product is provided without shutters
Specifications
Airvent Timer Controlled Extractor Fan 100mm - 457086A
£23.44 (Inc. VAT)
does this have flaps on the back to stop air blowing in when not in use
This fan does not include back draft shutters
