Diamond Walk In Shower Screen with 1400 x 700mm Tray - 8mm Chrome

Frameless Design

Frameless wet room screens have a high-end look and a minimalistic design style, requiring only wall channels to fix to your bathroom walls. They make your bathroom look and feel bigger while taking up the same amount of space as a framed screen.

Extra Tall 1950mm Glass Panels

Standard shower enclosure panels tend to be 1750 - 1800mm high, but this one is a full 1950mm high giving you extra splash protection and a fantastic high-end look.t.

8mm Thick Thermally Toughened Safety Glass

The 8mm glass used is of the highest standard. It conforms to EN12150-1 meaning that it's been rigorously tested and thermally toughened for superior safety and strength.

Support Bar Included

Holding this beautiful piece of glass in place is an equally stylish support bar. It's finished in a modern chrome and bring a lot of extra support to your new wet room enclosure. The included support arm measures 1m and can be easily cut to size. 

Easy Clean Glass Panel

A special coating has been applied to the glass panel to ensure cleaning is fast and easy. A simple wipe down will bring back crystal clear glass time and time again.

Left or Right Hand Orientation

Wet room screen shower enclosures can be fitted easily into either the left or right hand corners of your bathroom, allowing convenient entry no matter the existing layout.

Quick & Easy Installation

This shower panel has been designed so that fitting is quick and easy for your bathroom installer. This means you'll be enjoying your new shower enclosure before you know it!

High-Quality CE Marked Product

This shower enclosure is built to an extremely high standard. It's CE tested to comply with BS EN 14428 meaning it has been put through rigorous testing for use on the UK market.

Hydrolux Low Profile Shower Tray with Waste

Our shower trays are built with durability and performance in mind, with each one tested to support up to 4000kg, whether used with or without our own supplied riser leg kits. A typical 1200 x 800mm tray weighs just 18kg, making it significantly lighter than many stone resin options.

In terms of standards and sustainability, our trays are fully compliant with all UK and EU requirements, including CE, EN 14527, EN 198, and REACH regulations. While WRAS certification isn’t required for trays, our acrylic sheet is manufactured to EN 263 for domestic use. Unlike some alternatives, we don’t use chipboard or other wood-based reinforcement materials – instead, we use Flax Particle Board, a more environmentally friendly alternative that offers strength without compromising on sustainability.

Moreover, while it is possible to cut an acrylic capped tray, please note a cut edge is potentially exposed to water ingress.

High-Flow Waste

• Rate of 32 litres per minute.
• Standard 40mm connection
• Vented dome to allow higher flow
• Top access for easy maintenance
• Quick-release inner unit for ease of cleaning
• Chrome top

Important installation information: Please note, it's important to consider the minimum and maximum adjustment measurements. The enclosure doesn't sit flush to the side of a shower tray as this allows space for tiling.