How do I know if you need a twin impeller pump rather than a single-impeller or no pump at all?

You should fit a twin impeller pump when both your hot and cold supplies are low and you want them balanced, because twin impellers boost each side independently so showers and taps don't surge or run hot/cold. If you have a traditional hot water cylinder fed from a cold header tank and the cold feed is weak, a twin pump will improve shower performance across the board. If your system is served by a combi boiler that already delivers mains pressure, a twin impeller is generally unnecessary.

What is the difference between Positive Head and Universal pumps, and which one suits your set-up?

Positive Head pumps need a small head of water at the inlet, typically from a cold header tank above the pump, so they are perfect for gravity-fed systems; there are ten Positive Head options in this range. Universal pumps work with both positive and negative head conditions, so they're the safer choice if you're unsure or have a more modern layout; eight Universal models are available. If you know there's a header tank above the pump, a Positive Head unit often gives good value; if not, pick Universal for guaranteed compatibility.

What output (bar) should you choose for a single shower versus a whole bathroom or multiple outlets?

For a modest single shower, an output around 1.5 to 1.8 bar will give a noticeable boost without overkill; several 1.5 bar models are included in our range. If you want a strong power shower or need to run multiple outlets at once, aim for over 2.0 bar, 2.6 to 3.0 bar models provide a considerable increase and are better for larger bathrooms. a 1.5 bar RP50PT suits a simple shower, while a 3.0 bar RP100TU is appropriate if you want higher flow to several fittings.

How do centrifugal and regenerative pumps compare for noise, flow and typical use?

Regenerative pumps are often quieter and well suited to small-to-medium boosts and individual showers; there are twelve regenerative options in the range. Centrifugal pumps deliver higher flows and handle whole-bathroom demands more effectively, but they can be louder and are typically used where higher output is needed; six centrifugal models are available. If you want a quiet upgrade for a single shower, a regenerative 1.5–2.0 bar model is sensible; choose centrifugal when you need sustained high flow across several outlets.

Does pump construction matter, brass versus plastic, and which should you choose?

Brass construction offers greater durability and long-term corrosion resistance, making it a good investment if the pump will run frequently in a family home; six brass pumps are offered. Plastic pumps are lighter and generally less expensive, suitable where cost or infrequent use is a priority; twelve plastic options appear in the range. If you expect continuous or heavy use, pick brass for longevity; if you're upgrading a secondary bathroom or holiday property, a well-specified plastic pump will often do the job.

Salamander Twin Impeller Shower Pumps (Hot & Cold)

A twin impeller shower pump is designed specifically to boost the pressure of both your hot and cold water supplies. One impeller drives the cold side and the other impeller drives the hot side, providing equal pressure for both supplies. Salamander do a number of twin impeller pumps so we’ve broken them down into categories to make it easier to find what you need. Under 2.0 bar will provide you with a small to medium boost in pressure while over 2.0 bar will considerably up it.

‹

Filter By
18 results

Min

Max

Filter By
18 results

Min

Max

Filter Results

Sort by

18 results

salamander-1.5-bar-twin-impeller-positive-head-regenerative-shower-pump-ct50xrea

Salamander 1.5 Bar Twin Impeller Positive Head Regenerative Shower Pump - CT50XTRA

4.9

47 ratings

£160.22 inc
VAT

Salamander 1.8 Bar Twin Impeller Positive Head Shower Pump - CT60B

4.8

13 ratings

£191.64 inc
VAT

Salamander 2.6 Bar Twin Impeller Positive Head Shower Pump - CT80B

4.9

17 ratings

£221.30 inc
VAT

Salamander 1.8 Bar Twin Impeller Universal Head Shower Pump - CT60BU

4.8

15 ratings

£416.44 inc
VAT

Salamander 2.0 Bar Twin Impeller Positive Head Regenerative Shower Pump - CT75XTRA

4.9

29 ratings

£198.04 inc
VAT

Salamander 1.5 Bar Twin Impeller Positive Head Shower Pump - CTFORCE15PT

5.0

4 ratings

£312.00 inc
VAT

Salamander 2.0 Bar Twin Impeller Positive Head Shower Pump - CTFORCE20PT

4.5

2 ratings

£370.27 inc
VAT

Salamander 3.0 Bar Twin Impeller Positive Head Shower Pump - CTFORCE30PT

5.0

11 ratings

£320.72 inc
VAT

Salamander 1.5 Bar Twin Impeller Universal Head Shower Pump - CTFORCE15TU

5.0

2 ratings

£399.35 inc
VAT

Salamander 3.0 Bar Twin Impeller Universal Head Shower Pump - CTFORCE30TU

4.8

5 ratings

£506.75 inc
VAT

Salamander 1.5 Bar Twin Positive Head Centrifugal Shower & Bathroom Pump - RP50PT

5.0

13 ratings

£217.18 inc
VAT

Salamander 2.0 Bar Twin Positive Head Centrifugal Shower and Bathroom Pump - RP75PT

4.9

19 ratings

£335.72 inc
VAT

Salamander 3.0 Bar Twin Positive Head Centrifugal Shower and House Pump - RP100PT

4.9

19 ratings

£412.30 inc
VAT

Salamander 1.5 Bar Twin Universal Centrifugal Bathroom Pump - RP50TU

5.0

1 rating

£456.62 inc
VAT

salamander-2.0-bar-twin-impeller-universal-shower-pump-rp75tu

Salamander 2.2 Bar Twin Impeller Universal Shower Pump - RP75TU

4.9

18 ratings

£439.56 inc
VAT

Salamander 3.0 Twin Impeller Universal Centrifugal Shower Pump - RP100TU

4.9

19 ratings

£524.23 inc
VAT

Salamander CTFORCE20TU Shower Pump 2.0 Bar Twin Impeller Universal Head

5.0

1 rating

£431.99 inc
VAT

Save £77.90 | Was £509.89

Salamander 2.6 Bar Twin Impeller Universal Head Regenerative Shower Pump - CT80BU

4.7

3 ratings

£433.39 inc
VAT

Filter By 18 results

Filter By 18 results

Filter By
18 results

Filter By
18 results