How do I tell whether you need an automatic negative head unit or a top-entry flange for your pump?

If your shower pump has to work without a steady positive supply above the shower head you’ll need an automatic negative head unit to convert a positive head system into one suitable for a negative head pump. A top-entry flange such as the Compression Top Entry Flange 1" x 22mm is for pumps with pipework that enters from above and helps air-flow and sealing at that entry point. If your pump spec or plumber’s notes state “negative head” then fit the automatic unit; if the inlet pipe is 1" x 22mm from above, the compression top-entry flange is the match.

Will a noise-reducing pump mat actually cut down pump noise in my home?

Yes, a Noise Reducing Pump Mat (250 x 160mm) reduces vibration and structure-borne noise by isolating the pump from the mounting surface. It won’t remove motor whine entirely, but it often makes a noticeable difference on wooden floors or thin concrete by stopping rattles and resonance. fitting the mat under a floor-mounted booster often transforms a “buzzing” pump into a much quieter presence in the next room.

Which spare seals and service parts should you keep on hand for routine pump upkeep?

A good basic service pack is the Blue O Ring Service Kit (114.5 x 3mm x 8), which contains commonly used O-rings for Salamander pumps, and a Pressure Vessel Replacement Kit (ACCPV1L) to restore the vessel that smooths pressure pulses. Keep the O-ring kit for small leaks and routine resealing; replace the pressure vessel if you notice frequent pump cycling or poor flow steadiness. Keeping these two on hand saves time if you spot a leak or deteriorating performance.

What does a pressure vessel replacement kit do, and when should you fit one?

The Pressure Vessel Replacement Kit (ACCPV1L) restores the pump’s pressure vessel that evens out flow and prevents rapid on/off cycling of the motor. Fit one if you begin to feel pulsing at the shower, hear frequent pump starts, or notice unstable flow rates. The benefit is steadier water at the shower and less strain on the pump, though it’s an extra component that must match your pump model to work correctly.

What are the Homeboost fitting kit and Cold Water Storage Protection for, and who needs them?

The Homeboost Fitting Kit (CHBFIT01) provides the specific fittings you need to connect a HomeBoost unit correctly, so it’s useful if you’re installing that system; the Cold Water Storage Protection (WSP) is designed to protect and manage a cold water storage system, typically a cistern in the loft. If your system includes a cold water tank or you’re adding a HomeBoost-style unit, these accessories help ensure correct, reliable operation; if you have a mains-fed system with no storage cistern they’re usually unnecessary.

Salamander Shower Pump Accessories

Make sure you’ve got everything you need for your new Salamander shower pump installation with our collection of Salamander Shower Pump Accessories. We’ve got everything from top entry flanges for air flow optimisation right through to automatic negative head units which are used to convert a positive head system into one suitable for a negative head shower pump. Don’t risk a last minute dash to the local DIY shop and be fully prepared with Salamander accessories.

Filter By
7 results

Min

Max

Filter By
7 results

Min

Max

Filter Results

Sort by

7 results

Compression Top Entry Flange 1" x 22mm - SFLANGE

5.0

12 ratings

£41.29 inc
VAT

salamander-accpumpmat-noise-reducing-pump-mat-250mm-x-160mm

Salamander Noise Reducing Pump Mat 250mm x 160mm - ACCPUMPMAT

£26.99 inc
VAT

Save £4.43 | Was £31.42

Salamander Homeboost Fitting Kit - CHBFIT01

5.0

3 ratings

£36.82 inc
VAT

Salamander Pressure Vessel Replacement Kit - ACCPV1L

£80.90 inc
VAT

Salamander Blue O Ring Service Kit 114.5 x 3mm x 8 - SKORING02

5.0

1 rating

£15.73 inc
VAT

Salamander Non Return Valve - NRV

£21.19 inc
VAT

Salamander Cold Water Storage Protection - WSP

5.0

1 rating

£122.51 inc
VAT

Filter By 7 results

Filter By 7 results

Compression Top Entry Flange 1" x 22mm - SFLANGE

Salamander Noise Reducing Pump Mat 250mm x 160mm - ACCPUMPMAT

Salamander Homeboost Fitting Kit - CHBFIT01

Salamander Pressure Vessel Replacement Kit - ACCPV1L

Salamander Blue O Ring Service Kit 114.5 x 3mm x 8 - SKORING02

Salamander Non Return Valve - NRV

Salamander Cold Water Storage Protection - WSP

Filter By
7 results

Filter By
7 results