How do I decide between an anti-vibration mounting pad, a noise-reducing pump mat and anti-vibration flexible hoses?

Use an anti-vibration mounting pad (like the Stuart Turner pad) or a Salamander noise-reducing pump mat (250 x 160mm) when you need to isolate the pump from the floor to cut structure-borne noise; the mat is best for small footprint pumps and tight cupboards. Flexible anti-vibration hoses (single or set from Stuart Turner) reduce transmitted vibration along the pipework and are essential if your pump is mounted on joists or a metal frame. For many installations you'll want both a mat or pad plus at least one anti-vibration hose to tackle noise at its source and along the pipework.

When would I replace a pressure vessel kit versus just using an O-ring service kit?

Fit the Salamander pressure vessel replacement kit (ACCPV1L) if your pump's pressure vessel has failed, lost its air charge or is corroded, symptoms include irregular pressure or frequent cycling. Use the Blue O-Ring service kit (114.5 x 3mm x 8) for sealing leaks at flanges and joints or when the pump is dripping but the vessel itself still holds pressure. A quick way to decide: visible seal damage or leaks -> O-ring; unstable pressure or noisy cycling -> pressure vessel replacement.

What does the compression top entry flange 1" x 22mm do and when should you use it?

The compression top entry flange (1" x 22mm) gives a neat, secure top-entry connection between your 22mm pipework and a pump that accepts a 1" flange, which is common on many domestic booster pumps. It's the right choice when replacing an older top-entry pump or when your pipe run arrives above the pump rather than to the side. The flange reduces the need for extra adaptors and helps prevent leaks at the pump inlet.

Is a cold water storage protection unit necessary for booster pumps and what does it protect against?

A cold water storage protection unit (Salamander WSP) protects your cold supply and cistern from contamination and pressure anomalies when a booster pump is fitted, particularly in systems that boost from a storage tank rather than mains. It helps prevent backflow and can stop debris or dissolved gases reaching the tank, which is useful in older loft cisterns. The trade-off is added cost and space, but it's a sensible safeguard if you care about long-term water quality and pump reliability.

How do a non-return valve and a Homeboost fitting kit affect pump performance and reliability?

A non-return valve (NRV) prevents pumped water from flowing back into the source when the pump stops, preserving prime and stopping short-cycling; the Salamander NRV included in our range is a simple, inexpensive way to protect performance. A Homeboost fitting kit (CHBFIT01) supplies the correct fittings and adaptors you need to integrate a boost unit into your existing pipework, reducing leaks and installation errors. Together they make the system more reliable and cleaner to service, preventing pressure loss in a shower after the pump stops.

Shower Pump Accessories

You’ve decided not to put up with poor quality showers, you've considered which shower booster pump you need to buy, but have you thought about the shower pump accessories that you need to go with it? Our range of Shower Pump Accessories contains all of the mounting pads and flanges that you’ll need so don’t spend a fortune on an emergency run to the DIY shop, be prepared with Plumbworld.

Filter By
11 results

Min

Max

Filter By
11 results

Min

Max

Filter Results

Sort by

11 results

Compression Top Entry Flange 1" x 22mm - SFLANGE

5.0

12 ratings

£41.29 inc
VAT

Stuart Turner 27124 Anti Vibration Mounting Pad

4.7

34 ratings

£42.78 inc
VAT

salamander-accpumpmat-noise-reducing-pump-mat-250mm-x-160mm

Salamander Noise Reducing Pump Mat 250mm x 160mm - ACCPUMPMAT

£26.99 inc
VAT

Save £4.43 | Was £31.42

Stuart Turner Monsoon Anti-Vibration Flexible Hose (Single) - 28304

5.0

1 rating

£44.65 inc
VAT

Save £4.50 | Was £49.15

Stuart Turner Monsoon Anti-Vibration Flexible Hose (Set) - 28482

5.0

1 rating

£82.63 inc
VAT

Stuart Turner Showermate Anti-Vibration Flexible Hose (Set) - 28483

£73.25 inc
VAT

Salamander Homeboost Fitting Kit - CHBFIT01

5.0

3 ratings

£36.82 inc
VAT

Salamander Pressure Vessel Replacement Kit - ACCPV1L

£80.90 inc
VAT

Salamander Blue O Ring Service Kit 114.5 x 3mm x 8 - SKORING02

5.0

1 rating

£15.73 inc
VAT

Salamander Non Return Valve - NRV

£21.19 inc
VAT

Salamander Cold Water Storage Protection - WSP

5.0

1 rating

£122.51 inc
VAT

Filter By 11 results

Filter By 11 results

Filter By
11 results

Filter By
11 results